,
Gauly Légré Paul,
Sanou Ali,
Soro Ségnéninhinténin Bakary,
Coulibaly Mariame,
Yao N'guessan Alfred
The electrochemical characterisation of the materials used to make sensors is mostly based on the cyclic voltametry method. Cyclic voltametry is an electrical method for the dynamic study of electrochemical systems. Through a reversible potential sweep, the material is studied in contact with the ferri/ferrocyanide. Ferri/Ferrocyanide is one of the most studied chemical compounds in electrochemistry and photo-electrochemistry because of its singular known and controlled reactivity. The appearance of voltamorams and mathematical expressions make it possible to collect the information necessary for understanding the reaction. An electrode material is considered active if it shows a reversible peak in contact with the redox marker in cyclic voltametry. The mechanism of the reaction is also assessed using the peak potential difference ΔEp. The nature of the mass transport is determined by the anodic and cathodic peak current ratio Ipa/Ipc. The aim of this work is to compare the electrochemical activity of the Feri/Ferrocyanide couple achieved with carbon paste-based electrodes for application to the electrochemical sensor. The study of the peak potential difference ΔEp showed that the composition of the electrode material influences the reaction mechanism at the interface. Material transport and electronic charge transfer are impacted by complex phenomena. By studying the electrical quantities potential difference ΔEp, formal standard potential E° and current ratio Ipa/Ipc, the electrochemical sensors developed can be optimised.
| Published in | American Journal of Applied Chemistry (Volume 12, Issue 4) |
| DOI | 10.11648/j.ajac.20241204.12 |
| Page(s) | 89-94 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2024. Published by Science Publishing Group |
Ferri/Ferrocyanide, Cyclic Voltammetry, Modified Carbon Paste Electrode
| [1] | Asch, G. Desgoutte, P. Les capteurs en instrumentation industrielle - 8th edition. Dunod. 2017, p28. |
| [2] | Luo, P., Zhang, F., and Baldwin, R. P. Constant-potential amperometric detection of underivatized amino acids and peptides at a copper electrode. Analytical Chemistry. 1991, 63(17), 1702-1707. |
| [3] | Chen, S., Liu, Y., & Chen, J. Heterogeneous electron transfer at nanoscopic electrodes: importance of electronic structures and electric double layers. Chemical Society Reviews. 2014, 43(15), 5372-5386. |
| [4] | Parsons, R. The kinetics of electrode reactions and the electrode material. Surface Science. 1964, 2, 418-435. |
| [5] | Coulibaly, M., El Rhazi, M. Determination of Traces of Copper by Anodic Stripping Voltammetry at a Rotating Carbon Paste Disk Electrode Modified with Poly (1,8 Diaminonaphthalene), Journal of Analytical Chemistry 2009, 64(6), 632-636. |
| [6] | Yan, L., Niu, X., Wang, W., Li, X., Sun, X., Zheng, C.,... & Sun, W. Electrochemical sensor for rutin detection with graphene oxide and multi-walled carbon nanotube nanocomposite modified electrode. International Journal of Electrochemical Science. 2016, 11(2), 1738-1750. |
| [7] | Sapountzi, E., Braiek, M.,. Chateaux, J-F., Jaffrezic-Renault, N., and Lagarde, F. Recent Advances in Electrospun Nanofiber Interfaces for Biosensing Devices, Sensors. 2017, 17(8), 1887. |
| [8] | Murray, R. W. Chemically modified electrodes, Acc. Chem. Res. 1980, 13(5), 135 -141. |
| [9] | Murray, R. W., Ewing A. G., and Durst R. A.. Chemically modified electrodes. Molecular design for electroanalysis, Anal. Chem. 1987, 59(5), 379A-390A. |
| [10] | Wang, J. Voltammetry following nonelectrolytic preconcentration. In Electroanalytical chemistry, CRC Press. 2021, 1-88. |
| [11] | Kuwana, T., and French, W. G. Electrooxidation or Reduction of Organic Compounds into Aqueous Solutions Using Carbon Paste Electrode, Anal. Chem. 1964, 36(1), 241-242. |
| [12] | Svancara, I., Kalcher, K., Walcarius, A., and Vytras, K. Electroanalysis with Carbon Paste Electrodes, CRC Press. 2012. |
| [13] | Cai, X., Kalcher, K., Neuhold, C., and Ogorevc, B. An improved voltammetric method for the determination of trace amounts of uric acid with electrochemically pretreated carbon paste electrodes, Talanta. 1994, 41(3), 407-413. |
| [14] | Randles. J. E. A cathode ray polarograph. Part II, The current-voltage curves. Transactions of the Faraday Society. 1948, 44, 327-338. |
| [15] | Ševčik, A. Oscillographic polarography with periodical triangular voltage. Collection of Czechoslovak Chemical Communications. 1948, 13, 349-377. |
| [16] | Sanou, A., Coulibaly, M., N’dri, S. R., Tămaș, T. L., Bizo, L., Frentiu, T.,... & Turdean, G. L. Raw clay material-based modified carbon paste electrodes for sensitive heavy metal detection in drinking water. Journal of Materials Science. 2024, 1-17. |
| [17] | Belqat, B., & Belcadi, S., Electrochemical behaviour of ferrocene, perylene and tetracene in an electrolytically bound carbon paste electrode in water-phosphoric acid mixtures. Comptes Rendus de l'Académie des Sciences-Series IIC-Chemistry. 2001, 4(12), 933-939. |
| [18] | N'Guessan, K. J. M., N'Dri S. R., Yapo YHA, Gauly, L. P., Sanou, A., Soro, S. B., Coulibaly, M., Bamba, D., and Yao, N. A. Characterization and Application of Carbon Paste Electrode Modified by Moringa Oleifera Seed Powder to the Electrochemical Detection of Mercury. Chemical Science International Journal. 2024, 33(1): 36-46. |
| [19] | Bakary Soro, S. B., Coulibaly, M., Gauly, L. P., N'dri, S. R., Sanou, A.., and Trokourey, A. Characterization of clay materials from Côte d'Ivoire: possible application for the electrochemical analysis. Journal of Materials Science Research. 202312(1): 51-64. |
| [20] | N'dri, S. R., Coulibaly M., Yao N. A, Bamba D, & Zoro G E., Redox Characterization of the Ferri/Ferrocyanide System on the P-type Silicon Paste Electrode for Biosensor Application. Journal of Materials Science Research and Reviews. 2022, 5(3), 366-374. |
APA Style
Roger, N. S., Paul, G. L., Ali, S., Bakary, S. S., Mariame, C., et al. (2024). Investigation of ELectrochemical Behavior of Ferri/Ferrocyanide Redox on Carbon Paste Based Electrodes for Mercury (II) Electrochemical Sensor. American Journal of Applied Chemistry, 12(4), 89-94. https://doi.org/10.11648/j.ajac.20241204.12
ACS Style
Roger, N. S.; Paul, G. L.; Ali, S.; Bakary, S. S.; Mariame, C., et al. Investigation of ELectrochemical Behavior of Ferri/Ferrocyanide Redox on Carbon Paste Based Electrodes for Mercury (II) Electrochemical Sensor. Am. J. Appl. Chem. 2024, 12(4), 89-94. doi: 10.11648/j.ajac.20241204.12
AMA Style
Roger NS, Paul GL, Ali S, Bakary SS, Mariame C, et al. Investigation of ELectrochemical Behavior of Ferri/Ferrocyanide Redox on Carbon Paste Based Electrodes for Mercury (II) Electrochemical Sensor. Am J Appl Chem. 2024;12(4):89-94. doi: 10.11648/j.ajac.20241204.12
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.ajac.20241204.12,
author = {N'dri Seiny Roger and Gauly Légré Paul and Sanou Ali and Soro Ségnéninhinténin Bakary and Coulibaly Mariame and Yao N'guessan Alfred},
title = {Investigation of ELectrochemical Behavior of Ferri/Ferrocyanide Redox on Carbon Paste Based Electrodes for Mercury (II) Electrochemical Sensor
},
journal = {American Journal of Applied Chemistry},
volume = {12},
number = {4},
pages = {89-94},
doi = {10.11648/j.ajac.20241204.12},
url = {https://doi.org/10.11648/j.ajac.20241204.12},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajac.20241204.12},
abstract = {The electrochemical characterisation of the materials used to make sensors is mostly based on the cyclic voltametry method. Cyclic voltametry is an electrical method for the dynamic study of electrochemical systems. Through a reversible potential sweep, the material is studied in contact with the ferri/ferrocyanide. Ferri/Ferrocyanide is one of the most studied chemical compounds in electrochemistry and photo-electrochemistry because of its singular known and controlled reactivity. The appearance of voltamorams and mathematical expressions make it possible to collect the information necessary for understanding the reaction. An electrode material is considered active if it shows a reversible peak in contact with the redox marker in cyclic voltametry. The mechanism of the reaction is also assessed using the peak potential difference ΔEp. The nature of the mass transport is determined by the anodic and cathodic peak current ratio Ipa/Ipc. The aim of this work is to compare the electrochemical activity of the Feri/Ferrocyanide couple achieved with carbon paste-based electrodes for application to the electrochemical sensor. The study of the peak potential difference ΔEp showed that the composition of the electrode material influences the reaction mechanism at the interface. Material transport and electronic charge transfer are impacted by complex phenomena. By studying the electrical quantities potential difference ΔEp, formal standard potential E° and current ratio Ipa/Ipc, the electrochemical sensors developed can be optimised.
},
year = {2024}
}
TY - JOUR T1 - Investigation of ELectrochemical Behavior of Ferri/Ferrocyanide Redox on Carbon Paste Based Electrodes for Mercury (II) Electrochemical Sensor AU - N'dri Seiny Roger AU - Gauly Légré Paul AU - Sanou Ali AU - Soro Ségnéninhinténin Bakary AU - Coulibaly Mariame AU - Yao N'guessan Alfred Y1 - 2024/09/26 PY - 2024 N1 - https://doi.org/10.11648/j.ajac.20241204.12 DO - 10.11648/j.ajac.20241204.12 T2 - American Journal of Applied Chemistry JF - American Journal of Applied Chemistry JO - American Journal of Applied Chemistry SP - 89 EP - 94 PB - Science Publishing Group SN - 2330-8745 UR - https://doi.org/10.11648/j.ajac.20241204.12 AB - The electrochemical characterisation of the materials used to make sensors is mostly based on the cyclic voltametry method. Cyclic voltametry is an electrical method for the dynamic study of electrochemical systems. Through a reversible potential sweep, the material is studied in contact with the ferri/ferrocyanide. Ferri/Ferrocyanide is one of the most studied chemical compounds in electrochemistry and photo-electrochemistry because of its singular known and controlled reactivity. The appearance of voltamorams and mathematical expressions make it possible to collect the information necessary for understanding the reaction. An electrode material is considered active if it shows a reversible peak in contact with the redox marker in cyclic voltametry. The mechanism of the reaction is also assessed using the peak potential difference ΔEp. The nature of the mass transport is determined by the anodic and cathodic peak current ratio Ipa/Ipc. The aim of this work is to compare the electrochemical activity of the Feri/Ferrocyanide couple achieved with carbon paste-based electrodes for application to the electrochemical sensor. The study of the peak potential difference ΔEp showed that the composition of the electrode material influences the reaction mechanism at the interface. Material transport and electronic charge transfer are impacted by complex phenomena. By studying the electrical quantities potential difference ΔEp, formal standard potential E° and current ratio Ipa/Ipc, the electrochemical sensors developed can be optimised. VL - 12 IS - 4 ER -
Science and Technology Department, Ecole Normale Supérieure, Abidjan, Ivory Coast
Science and Technology Department, Ecole Normale Supérieure, Abidjan, Ivory Coast; Matter Structures and Technology Training and Research Unit (UFR-SSMT), Université Félix Houphouët-Boigny, Abidjan, Ivory Coast
Science and Technology Department, Ecole Normale Supérieure, Abidjan, Ivory Coast; Joint Research and Innovation Unit in Agronomic Sciences and Processing (UMRI-SAPT), Institut National
Science and Technology Department, Ecole Normale Supérieure, Abidjan, Ivory Coast; Matter Structures and Technology Training and Research Unit (UFR-SSMT), Université Félix Houphouët-Boigny, Abidjan, Ivory Coast
Science and Technology Department, Ecole Normale Supérieure, Abidjan, Ivory Coast
Science and Technology Department, Ecole Normale Supérieure, Abidjan, Ivory Coast
