Anode material and its structure have important influence on the performance of microbial fuel cell. This paper reviews the development of carbon anode of microbial fuel cell briefly, describes the general trend of its improved method, and the research status of the anode modification of microbial fuel cell is introduced from two aspects, which are body modification of anode material and anode modification with external modifying group.
Published in | International Journal of Energy and Power Engineering (Volume 4, Issue 6) |
DOI | 10.11648/j.ijepe.20150406.15 |
Page(s) | 358-361 |
Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
Copyright |
Copyright © The Author(s), 2015. Published by Science Publishing Group |
Microbial Fuel Cell, Anode, Modification
[1] | Zhou MH, Chi ML, Luo JM, He HH, Jin T (2011) An overview of electrode materials in microbial fuel cells. J Power Sources,196(10): 4427–4435. |
[2] | Kim BH, Chang IS, Gadd GM (2007) Challenges in microbial fuel cell development and operation. Appl Microbiol Biotechnol, 76(3):485–494. |
[3] | You J, Santoro C, Greenman J, Melhuish C, Cristiani P, Li B, Ieropoulos I. Micro-porous layer (MPL)-based anode for microbial fuel cells [J]. Int J Hydrogen Energ, 2014, 39(36):21811-21818. |
[4] | 次素琴, 吴娜, 温珍海, 李景虹. 微生物燃料电池电极材料研究进展, 电化学, 2012, 18(3): 243-251。 |
[5] | 王鑫, 李楠, 高宁圣洁, 周启. 微生物燃料电池碳基阳极材料的研究进展. 中国给水排水,2012, (28)22: 5-8。 |
[6] | B.E. Logan, B. Hamelers, R. Rozendal, U. Schro¨ der, J. Keller, S. Freguia, P. Aelterman, W. Verstraete, K. Rabaey, Microbial fuel cells: methodology and technology, Environ. Sci. Technol. 40 (2006) 5181–5192. |
[7] | K. Watanabe, Recent developments in microbial fuel cell technologies for sustainable bioenergy, J. Biosci. Bioeng. 6 (2008) 528–536. |
[8] | O Lefebvre, Z Tan, S Kharkwal, H Y Ng. Effect of increasing anodic NaCl concentration on microbial fuel cell performance. Bioresource Technology, 2012, 112: 336-340. |
[9] | H Yazdi, L A Gaviria, Z J Ren. Pluggable microbial fuel cell stacks for septic wastewater treatment and electricity production. Bioresource Technology, 2015, 180: 258-263. |
[10] | 梁鹏,范明志,曹效鑫,黄霞,黄正宏,王诚. 填料型微生物燃料电池产电特性的研究[J]. 环境科学,2008,29(2):512-517。 |
[11] | 朱超,解井坤,易维洁,高静.微生物燃料电池快速处理含偶氮染料废水的研究. 工业水处理,2015, 35(8): 62-65。 |
[12] | Hou B,Sun J,Hu Y Y.Effect of enrichment procedures on performance and microbial diversity of microbial fuel cell for Congo red decolorization and electricity generation.Appl.Microbiol.Biotechnol.,2011,90(4):1563-1572. |
[13] | Nimje V R,Chen C CY,Chen C C,et al.Glycerol degradation in single-chamber microbial fuel cell [J].Bioresource Technology,2011,102(3):2629-2634. |
[14] | 陈妹琼,程发良,郭文显,张敏, 柳鹏. 微生物燃料电池阳极材料的最新研究进展. 电源技术,2015, 39(4): 857-860。 |
[15] | Torres C I,Marcus A K,Lee H S, et al.A kinetic perspective on extracellular electron transfer by anode-respiring bacteria[J].FEMS Microbiology Reviews,2010 34(1):3-17. |
[16] | Wang X,Cheng S A,Feng Y J,et al.Use of carbon mesh anodes and the effect of different pretreatment methods on power production in microbial fuel cells [J].Environmental Science&Technology,2009,43(17):6870-6874. |
[17] | Cheng S A,Logan B E.Ammonia treatment of carbon cloth anodes to enhance power generation of microbial fuel cells[J].Electrochemistry Communications,2007,9(3):492-496. |
[18] | Crittenden S R,Sund C J.Sumner J J.Mediating electron transfer from bacteria to a gold electrode via a self-assembled monolayer[J].Langmuir,2006,22(23):9473-9476. |
[19] | Tang X,Guo K,Li H,et al.Electrochemical treatment of graphite to enhance electron transfer from bacteria to electrodes[J]. Bioresource Technology,2011,102(3):3558-3560. |
[20] | Zhu N W,Chen X,Zhang T,et al.Improved performance of membrane free single-chamber air-cathode microbial fuel cells with nitric acid and ethylene diamine surface modified activated carbon fiber felt anodes[J].Bioresource Technol,2011,102(1):422-426. |
[21] | Feng Y J,Yang Q,Wang X,et al.Treatment of carbon fiber brush anodes for improving power generation in air-cathode microbial fuel cells[J].Journal of Power Sources,2010,195(7):1841-1844. |
[22] | Liu J,Qiao Y.Guo C X,et al.Graphene/carbon cloth anode for high-performance mediatorless microbial fuel cell [J].Bioresource Technology,2012,114:275-280. |
[23] | Hou J X,Liu Z L,Zhang P Y.A new method for fabrication of grapheme/polyaniline nanocomplex modified microbial fuel cell anodes[J].Journal of Power Sources 2013, 224(2): 139-144. |
[24] | Zou Y,Pisciotta J,Baskakov I V.Nanostructured polypyrrole-coated anode for sun-powered microbial fuel cells [J].Bioelectrochemistry,2010,79(1):50-56. |
[25] | Zhang Y,Mo G,Li X,et al.A grapheme modified anode to improve the performance of microbial fuel cell[J].Journal of Power Sources,2011,196(13):5402-5407. |
[26] | Lowy D A,Tender L M,Zeikus J G,et al.Harvesting energy from the marine sediment-water interface Ⅱ: kinetic activity of anode materials[J].Biosensors and Bioelectronics.2006.21(11):2058-2063. |
[27] | Bibiana Cercado-Quezad,Marie-Line Delia,Alain Bergel.Electrochemical micro-structuring of graphite felt electrodes for accelerated formation of electroactive biofilms on microbial anodes[J].Electrochemistry Communications.2011,13(5):440-443. |
[28] | Lai B,Tang X H,Li H R,et al.Power production enhancement with a polyaniline modified anode in microbial fuel cells[J].Biosens Bioelectron,2011,28(1):373-377. |
[29] | Qiao Y,Bao S J,Li C M,et al.Nanostructured polyaniline/titanium dioxide composite anode for microbial fuel cells[J].ACS Nano,2008,,2(1):113-119. |
APA Style
Fan Liping, Xu Dandan. (2015). Research Status of Carbon Anode and Its Modification for Microbial Fuel Cell. International Journal of Energy and Power Engineering, 4(6), 358-361. https://doi.org/10.11648/j.ijepe.20150406.15
ACS Style
Fan Liping; Xu Dandan. Research Status of Carbon Anode and Its Modification for Microbial Fuel Cell. Int. J. Energy Power Eng. 2015, 4(6), 358-361. doi: 10.11648/j.ijepe.20150406.15
AMA Style
Fan Liping, Xu Dandan. Research Status of Carbon Anode and Its Modification for Microbial Fuel Cell. Int J Energy Power Eng. 2015;4(6):358-361. doi: 10.11648/j.ijepe.20150406.15
@article{10.11648/j.ijepe.20150406.15, author = {Fan Liping and Xu Dandan}, title = {Research Status of Carbon Anode and Its Modification for Microbial Fuel Cell}, journal = {International Journal of Energy and Power Engineering}, volume = {4}, number = {6}, pages = {358-361}, doi = {10.11648/j.ijepe.20150406.15}, url = {https://doi.org/10.11648/j.ijepe.20150406.15}, eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijepe.20150406.15}, abstract = {Anode material and its structure have important influence on the performance of microbial fuel cell. This paper reviews the development of carbon anode of microbial fuel cell briefly, describes the general trend of its improved method, and the research status of the anode modification of microbial fuel cell is introduced from two aspects, which are body modification of anode material and anode modification with external modifying group.}, year = {2015} }
TY - JOUR T1 - Research Status of Carbon Anode and Its Modification for Microbial Fuel Cell AU - Fan Liping AU - Xu Dandan Y1 - 2015/12/30 PY - 2015 N1 - https://doi.org/10.11648/j.ijepe.20150406.15 DO - 10.11648/j.ijepe.20150406.15 T2 - International Journal of Energy and Power Engineering JF - International Journal of Energy and Power Engineering JO - International Journal of Energy and Power Engineering SP - 358 EP - 361 PB - Science Publishing Group SN - 2326-960X UR - https://doi.org/10.11648/j.ijepe.20150406.15 AB - Anode material and its structure have important influence on the performance of microbial fuel cell. This paper reviews the development of carbon anode of microbial fuel cell briefly, describes the general trend of its improved method, and the research status of the anode modification of microbial fuel cell is introduced from two aspects, which are body modification of anode material and anode modification with external modifying group. VL - 4 IS - 6 ER -