Cooking Oil fumes have become one of the most important pollutants in China's society. Oil fume purification equipment has emerged as the times require. China has issued inspection standards for the quality control of such products, but these standards have some drawbacks such as poor operation, low test accuracy, and poor data reproducibility. According to actual work experience, this method is based on the sampling process and the extraction solution. The recommendations for optimization of the air-tightness, air-tightness, exhaust emissions, and testing instruments are provided in 5 areas, which provide references for the quality inspection of such products.
Published in | International Journal of Environmental Protection and Policy (Volume 6, Issue 2) |
DOI | 10.11648/j.ijepp.20180602.12 |
Page(s) | 32-35 |
Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
Copyright |
Copyright © The Author(s), 2018. Published by Science Publishing Group |
COFs Control Equipment, Testing Method, Optimization Analysis
[1] | State Environmental Protection Administration. Technical requirements and testing technical specifications for cooking fume purification equipment (for trial) (HJ/T 62-2001) [S]. China Environmental Science Press, 2000 |
[2] | State Environmental Protection Administration, State Administration of Quality Supervision, Inspection and Quarantine. Standard for fume emission in the catering industry (for trial implementation) (GB 18483-2001) [S]. China Environmental Science Press, 2000 |
[3] | Fu Aimin, Wang Yunfei, Jia Linlin. Analysis and Study on Purification Technology of Oil Fume Waste Gas in Food Industry [J]. Environmental Science and Management, 2016, 41(09):105-108 |
[4] | Chen Zecheng, Chen Yujun. Quality Control of Cooking Oil Purifying Equipment Certification Testing in Catering Industry [J]. China Environmental Protection Industry, 2016(06):52-54 |
[5] | Xiang Dong, Yang Xia, Zhu Xianling, Jiang Zhanxiang, Xu Lei, Yang Qing. Experimental study on purification performance of a new type of wet impinging flow fume purification device [J]. Energy and Energy Conservation, 2018(03): 63-65 |
[6] | Fang Xiaoyan, Li Minghui. Some thoughts on the fume monitoring in the catering industry [J]. Resource Conservation and Environmental Protection, 2016(04):131 |
[7] | Niu Yanlong. Research on purification technology of fume pollution in catering industry [J]. Science and Technology Outlook, 2015, 25(29):137 |
[8] | Zhang Yajuan. Analysis of Environmental Impact Assessment of Catering Industry Projects during Operation Period [J]. Science and Technology Innovation and Application, 2015(01):88 |
[9] | State Environmental Protection Administration. Determination of Particles in Fixed Pollution Source Exhaust and Sampling Method of Gaseous Pollutants (GB/T16157-1996). China Environmental Science Press, 1996 |
[10] | Chen Guofeng, Wang Wei, Zhang Huaiwei. Discussion on Application Points of "Standard for Cooking Oil Fume Emission (Trial)" (GB18483-2001) [J]. Instrumentation and Analysis Monitoring, 2016(01):44-46 |
APA Style
Jun-Xiao, Lihua-Wang, Yan-Liu, Haien-Xiang. (2018). An Optimization Analysis on Testing Method for Cooking Oil Fumes Control Equipment in China. International Journal of Environmental Protection and Policy, 6(2), 32-35. https://doi.org/10.11648/j.ijepp.20180602.12
ACS Style
Jun-Xiao; Lihua-Wang; Yan-Liu; Haien-Xiang. An Optimization Analysis on Testing Method for Cooking Oil Fumes Control Equipment in China. Int. J. Environ. Prot. Policy 2018, 6(2), 32-35. doi: 10.11648/j.ijepp.20180602.12
AMA Style
Jun-Xiao, Lihua-Wang, Yan-Liu, Haien-Xiang. An Optimization Analysis on Testing Method for Cooking Oil Fumes Control Equipment in China. Int J Environ Prot Policy. 2018;6(2):32-35. doi: 10.11648/j.ijepp.20180602.12
@article{10.11648/j.ijepp.20180602.12, author = {Jun-Xiao and Lihua-Wang and Yan-Liu and Haien-Xiang}, title = {An Optimization Analysis on Testing Method for Cooking Oil Fumes Control Equipment in China}, journal = {International Journal of Environmental Protection and Policy}, volume = {6}, number = {2}, pages = {32-35}, doi = {10.11648/j.ijepp.20180602.12}, url = {https://doi.org/10.11648/j.ijepp.20180602.12}, eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijepp.20180602.12}, abstract = {Cooking Oil fumes have become one of the most important pollutants in China's society. Oil fume purification equipment has emerged as the times require. China has issued inspection standards for the quality control of such products, but these standards have some drawbacks such as poor operation, low test accuracy, and poor data reproducibility. According to actual work experience, this method is based on the sampling process and the extraction solution. The recommendations for optimization of the air-tightness, air-tightness, exhaust emissions, and testing instruments are provided in 5 areas, which provide references for the quality inspection of such products.}, year = {2018} }
TY - JOUR T1 - An Optimization Analysis on Testing Method for Cooking Oil Fumes Control Equipment in China AU - Jun-Xiao AU - Lihua-Wang AU - Yan-Liu AU - Haien-Xiang Y1 - 2018/06/19 PY - 2018 N1 - https://doi.org/10.11648/j.ijepp.20180602.12 DO - 10.11648/j.ijepp.20180602.12 T2 - International Journal of Environmental Protection and Policy JF - International Journal of Environmental Protection and Policy JO - International Journal of Environmental Protection and Policy SP - 32 EP - 35 PB - Science Publishing Group SN - 2330-7536 UR - https://doi.org/10.11648/j.ijepp.20180602.12 AB - Cooking Oil fumes have become one of the most important pollutants in China's society. Oil fume purification equipment has emerged as the times require. China has issued inspection standards for the quality control of such products, but these standards have some drawbacks such as poor operation, low test accuracy, and poor data reproducibility. According to actual work experience, this method is based on the sampling process and the extraction solution. The recommendations for optimization of the air-tightness, air-tightness, exhaust emissions, and testing instruments are provided in 5 areas, which provide references for the quality inspection of such products. VL - 6 IS - 2 ER -