So-called wall flows are usable in many technical applications as a simple and reliable device for exhausting of light materials as dust, smoke, hot air, etc. In another cases, such flows can make troubles by treatment of light materials as fibers, etc. and it is necessary to suppress the wall effects by suitable design adjustments. But there is described a useful effect of wall flows on quality of fibrous product, too.
Published in |
International Journal of Mechanical Engineering and Applications (Volume 3, Issue 1-1)
This article belongs to the Special Issue Numerical Flow Simulations in Textile Industry |
DOI | 10.11648/j.ijmea.s.2015030101.15 |
Page(s) | 28-32 |
Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
Copyright |
Copyright © The Author(s), 2014. Published by Science Publishing Group |
Numerical Flow Simulation, Wall Effect, Wall Flow
[1] | J. Pelant, K. Adamek, "Flow around moving surface", ECCOMAS (Europ. Congress on Comput. Meth. in Appl, Sciences and Engineering), University of Jyvaskyla, Finland, 2004. ISBN …. |
[2] | J. Pelant, K. Adamek, "Luftstroemung entlang des rotierenden Kardenbelags", Chemnitzer Textilmachinen-Tagung, TU Chemnitz, BRD, 2003. ISBN … |
[3] | K. Adamek, J. Pelant, "Velocity field around rotating surfaces, "XXIInd. int. conf. of departments of thermomech. and fluid mech., Doubice, 2003, ISBN 80-8073-710-1 (in Czech). |
[4] | K. Adamek, J. Kolar, "Influence of the induced airflow on calendering", EFM11 (Experimental Fluid Mechanics). TU Liberec, JiCin, 2011. ISBN 978-80-7372-784-0. |
[5] | K. Adamek, "Einfluss der induzierten Luftstroemung beim Kalandrieren", Chemnitzer Textiltechnik Tagung, TU Chemnitz, 2011, ISBN 978-3-9812554-7-8. |
[6] | K. Adamek, J. Kolar, "Numerical flow simulations used in industrial problems", ECCOMAS (Europ. Congress on Comput. Meth. in Appl. Sciences and Engineering). TU Wien, Austria, 2012, ISBN 978-3-9502481-9-7. |
[7] | K. Adamek, J. Kolar, "Induced airflow around the calendering drums", Int. Journal of. Mechan. Eng. and Applic. Science PG, 2013, ISSN 2330-0248, ISSN 2330-023x. |
[8] | K. Adamek, J. Zak, P. Kavan, P. Sidlof, J. Kolar, "Contactless pressing of a sheet", EFM13 (Experimental Fluid Mechanics), TU Liberec, Kutna Hora, 2013, ISBN 978-80-260-5375-0. |
[9] | J. Bukovsky, "Wall effect applications" Int. conf. Applic. of exp. meth. in fluid. mech., VSDS Zilina, 1984 (in Czech). |
[10] | K. Adamek, "Automatic weft repair", report VUTS Liberec, 1996, applied on air jet looms Camel, Vega etc. VUTS Liberec, 2000. |
[11] | Utility design No. CZ - 2012-25916: Zarizeni pro upravu netkane textilie (Device for treating of nonwoven layer), 25.06.2012. |
[12] | Utility design No. DE202012012256: Einrichtung zur Behandlung eines Vliesstoffs, 2013-02-27. |
APA Style
Karel Adamek, Dusan Cejka, Zdeněk Mecl, Jaroslav Pelant. (2014). Wall Flows and their Applications. International Journal of Mechanical Engineering and Applications, 3(1-1), 28-32. https://doi.org/10.11648/j.ijmea.s.2015030101.15
ACS Style
Karel Adamek; Dusan Cejka; Zdeněk Mecl; Jaroslav Pelant. Wall Flows and their Applications. Int. J. Mech. Eng. Appl. 2014, 3(1-1), 28-32. doi: 10.11648/j.ijmea.s.2015030101.15
AMA Style
Karel Adamek, Dusan Cejka, Zdeněk Mecl, Jaroslav Pelant. Wall Flows and their Applications. Int J Mech Eng Appl. 2014;3(1-1):28-32. doi: 10.11648/j.ijmea.s.2015030101.15
@article{10.11648/j.ijmea.s.2015030101.15, author = {Karel Adamek and Dusan Cejka and Zdeněk Mecl and Jaroslav Pelant}, title = {Wall Flows and their Applications}, journal = {International Journal of Mechanical Engineering and Applications}, volume = {3}, number = {1-1}, pages = {28-32}, doi = {10.11648/j.ijmea.s.2015030101.15}, url = {https://doi.org/10.11648/j.ijmea.s.2015030101.15}, eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmea.s.2015030101.15}, abstract = {So-called wall flows are usable in many technical applications as a simple and reliable device for exhausting of light materials as dust, smoke, hot air, etc. In another cases, such flows can make troubles by treatment of light materials as fibers, etc. and it is necessary to suppress the wall effects by suitable design adjustments. But there is described a useful effect of wall flows on quality of fibrous product, too.}, year = {2014} }
TY - JOUR T1 - Wall Flows and their Applications AU - Karel Adamek AU - Dusan Cejka AU - Zdeněk Mecl AU - Jaroslav Pelant Y1 - 2014/10/17 PY - 2014 N1 - https://doi.org/10.11648/j.ijmea.s.2015030101.15 DO - 10.11648/j.ijmea.s.2015030101.15 T2 - International Journal of Mechanical Engineering and Applications JF - International Journal of Mechanical Engineering and Applications JO - International Journal of Mechanical Engineering and Applications SP - 28 EP - 32 PB - Science Publishing Group SN - 2330-0248 UR - https://doi.org/10.11648/j.ijmea.s.2015030101.15 AB - So-called wall flows are usable in many technical applications as a simple and reliable device for exhausting of light materials as dust, smoke, hot air, etc. In another cases, such flows can make troubles by treatment of light materials as fibers, etc. and it is necessary to suppress the wall effects by suitable design adjustments. But there is described a useful effect of wall flows on quality of fibrous product, too. VL - 3 IS - 1-1 ER -